Available sizes | Price |
---|
Product details | |
---|---|
Packaging Size: | |
Brand: | Dr Fixit |
Usage surfaces: | Exteriors |
Step 1: Crack Filling: Clean the receiving plastered surface of all loose particles, dirt, remove all algae & fungus by pressure jet wash. Inspect for cracks if any, and clean and moisten them. Providing and applying ready to use acrylic polymeric non-shrink Dr. Fixit Crack X Paste for cracks up to 5 mm and larger cracks up to 10 mm should be filled with Dr. Fixit Crack –X Shrinkfree . Step2: External Wall Waterproof Decorative Coating - Providing & Applying one coats of Dr. Fixit Raincoat Waterproof Coat without any dilution Maintain the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-150 microns DFT.
Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion.
Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
Permeability – It reduces the permeability of water into concrete.
Strength – The setting time and compressive strength of the concrete remains within the specification limits.
Shrinkage – Reduces shrinkage crack development in plaster & concrete.
Workability – Improves workability of freshly mixed cement concrete.
Durability – Increases durability by improving waterproofing of concrete.
Surface Preparation Remove dust, laitance etc. by wire brush and broom. Clean the surface with water and make Surface Saturated Dry (SSD) condition. Check the surface moisture content and temperature before application of the coating.
Dressing at Junctions Apply the first coat of Dr. Fixit material on the angle fillet. Place and soak 150 mm width of 45-micron open woven glass fiber mesh as reinforcement on the wet first coat to arrest cracking.
Coating Application Apply
Q. How do I calculate waterproofing cost for Dr Fixit Raincoat Waterproof Coating?We've developed WATERPROOFING COST CALCULATOR where you can calculate the tentative cost of waterproofing. |
Q. How do I apply Dr Fixit Raincoat Waterproof Coating?Step 1: Crack Filling: Clean the receiving plastered surface of all loose particles, dirt, remove all algae & fungus by pressure jet wash. Inspect for cracks if any, and clean and moisten them. Providing and applying ready to use acrylic polymeric non-shrink Dr. Fixit Crack X Paste for cracks up to 5 mm and larger cracks up to 10 mm should be filled with Dr. Fixit Crack –X Shrinkfree . Step2: External Wall Waterproof Decorative Coating - Providing & Applying one coats of Dr. Fixit Raincoat Waterproof Coat without any dilution Maintain the spreading rate of 3.5 -4.0 sq mtr per litre / coat application to achieve about 120-150 microns DFT. |
Q. Do you provide any service warranty for Dr Fixit Raincoat Waterproof Coating?There are two kinds of warranties involved in painting process. |
Q. In what variants and packaging price Dr Fixit Raincoat Waterproof Coating Is available?Dr Fixit Raincoat Waterproof Coating Is Available in different variant listed below. |
Q. Can I use Dr Fixit Raincoat Waterproof Coating for Exteriors leakage waterproofing?Yes, Dr Fixit Raincoat Waterproof Coating can be used for Exteriors leakage waterproofing |