Available sizes | Price |
---|
Product details | |
---|---|
Packaging Size: | |
Brand: | Dr Fixit |
Usage surfaces: | Exteriors |
Step 1: Crack Filling: Clean the receiving plastered surface of all loose particles, dirt, remove all algae & fungus by pressure jet wash. Inspect for cracks if any, and clean and moisten them. Providing and applying ready to use acrylic polymeric non-shrink Dr. Fixit Crack X Paste for cracks up to 5 mm and larger cracks up to 10 mm should be filled with Dr. Fixit Crack –X Shrinkfree. Step 2: Providing & applying 2 coats of Dr. Fixit Raincoat an elastomeric acrylic, external wall waterproof coating at coverage of 3.0 to 3.5Sqm / Litre/coat on prepared & primed surface with Dr. Fixit Primeseal Primer at coverage of 8.0 to 9.0 Sqm / Litre/coat to achieve DFT of 110 to 120 micron complete.
Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion.
Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
Permeability – It reduces the permeability of water into concrete.
Strength – The setting time and compressive strength of the concrete remains within the specification limits.
Shrinkage – Reduces shrinkage crack development in plaster & concrete.
Workability – Improves workability of freshly mixed cement concrete.
Durability – Increases durability by improving waterproofing of concrete.
Surface Preparation Remove dust, laitance etc. by wire brush and broom. Clean the surface with water and make Surface Saturated Dry (SSD) condition. Check the surface moisture content and temperature before application of the coating.
Dressing at Junctions Apply the first coat of Dr. Fixit material on the angle fillet. Place and soak 150 mm width of 45-micron open woven glass fiber mesh as reinforcement on the wet first coat to arrest cracking.
Coating Application Apply
Q. How do I calculate waterproofing cost for Dr Fixit Raincoat?We've developed WATERPROOFING COST CALCULATOR where you can calculate the tentative cost of waterproofing. |
Q. How do I apply Dr Fixit Raincoat?Step 1: Crack Filling: Clean the receiving plastered surface of all loose particles, dirt, remove all algae & fungus by pressure jet wash. Inspect for cracks if any, and clean and moisten them. Providing and applying ready to use acrylic polymeric non-shrink Dr. Fixit Crack X Paste for cracks up to 5 mm and larger cracks up to 10 mm should be filled with Dr. Fixit Crack –X Shrinkfree. Step 2: Providing & applying 2 coats of Dr. Fixit Raincoat an elastomeric acrylic, external wall waterproof coating at coverage of 3.0 to 3.5Sqm / Litre/coat on prepared & primed surface with Dr. Fixit Primeseal Primer at coverage of 8.0 to 9.0 Sqm / Litre/coat to achieve DFT of 110 to 120 micron complete. |
Q. Do you provide any service warranty for Dr Fixit Raincoat?There are two kinds of warranties involved in painting process. |
Q. In what variants and packaging price Dr Fixit Raincoat Is available?Dr Fixit Raincoat Is Available in different variant listed below. |
Q. Can I use Dr Fixit Raincoat for Exteriors leakage waterproofing?Yes, Dr Fixit Raincoat can be used for Exteriors leakage waterproofing |