Dr Fixit Pidifin 2k Waterproofing Solution Expert

We've developed WATERPROOFING COST CALCULATOR where you can calculate the tentative cost of waterproofing.

Step 1: Surface Preparation Remove dust, laitance etc. by wire brush and broom. Clean the surface with water and make Surface Saturated Dry (SSD) condition. Check the surface moisture content and temperature before application of the coating. Step 2: Dressing at Junctions Apply the first coat of Dr. Fixit material on the angle fillet. Place and soak 150 mm width of 45-micron open woven glass fiber mesh as reinforcement on the wet first coat to arrest cracking. Step 3: Coating Application Apply first coat at desired product coverage on the roof slab. Allow the coating to dry for a minimum of 6 – 8 hours. Apply the 2nd coat in the entire area in the perpendicular direction to the first coat. Coating to be terminated below the drip mould level to avoid the possibility of water entry along the parapet wall. During summer, cure the coating using moist hessian cloths for 7 days.

There are two kinds of warranties involved in painting process.
1. Paint Product Warranty and
2. Service Warranty.
Paint Product warranty if applicable is directly provided by manufacturers of paint (with their TERMS & CONDITIONS ).
Our painting service warranty will be of 1 year in selected painting systems.

Dr Fixit Pidifin 2k Is Available in different variant listed below.

Yes, Dr Fixit Pidifin 2k can be used for Bathroom / Kitchen leakage waterproofing

Yes, Dr Fixit Pidifin 2k can be used for Roof leakage waterproofing

Yes, Dr Fixit Pidifin 2k can be used for Terrace leakage waterproofing

Yes, Dr Fixit Pidifin 2k can be used for Watertank leakage waterproofing

Yes, Dr Fixit Pidifin 2k can be used for Exteriors leakage waterproofing